27 May

How to configure Motion Detection and recording for eLine Tribrid Recorders

Technical Support Knowledge Base: How to configure Motion Detection and recording for eLine Tribrid Recorders

Click Here to Download a Printable PDF

From Live screen:

  • Right click and choose Main Menu
  • Login
  • Click on the CAMERA icon [bottom row]
  • Click on ENCODE [Left column]
  • Select the recording resolution and frame rates desired for each camera
  • Click APPLY and SAVE when all cameras have been adjusted
  • Click on EVENT icon [bottom row] **IMPORTANT** DO NOT “COPY TO ALL” WITHIN THIS MENU. DOING SO WILL SET ALL CHANNELS TO RECORD ON CH 1
  • Click on DETECT/VIDEO DETECT
  • ENABLE motion for each channel
  • Click region SETUP (do this for all channels) To select a region – left click and drag across screen to turn blocks red RED = Motion CLEAR = NO motion

figure-2-motion

  •  Right click to exit region settings
  • Click APPLY and SAVE
  • Click on the STORAGE icon [bottom row]
  • Click SCHEDULE
  • Click on the COG WHEEL icon  [right side]
  • Deselect REGULAR and SELECT MD for Period 1

figure-3-motion

  •  Select ALL for all days, click SAVE
  • Click COPY and select ALL for all cameras
  • Click APPLY
  • Click RECORD [Left column]
  • Select ALL button listed under MAIN STREAM  SCHEDULE (or it also may say AUTO)
  • Click APPLY/OK
  • Right-Click to exit the Menu A green camera / red running men icons appear at the top right corner of each camera if motion is detecting. THERE ARE NO ICONS visible if motion is not being detected.

 

  •  Green camera = Recording to the HDD
  • Red running men = Motion is enabled and working
Share this

Leave a reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.