Technical Support Knowledge Base: How to configure Motion Detection and recording for eLine Tribrid Recorders

Click Here to Download a Printable PDF

From Live screen:

• Right click and choose Main Menu
• Login
• Click on the CAMERA icon [bottom row]
• Click on ENCODE [Left column]
• Select the recording resolution and frame rates desired for each camera
• Click APPLY and SAVE when all cameras have been adjusted
• Click on EVENT icon [bottom row] **IMPORTANT** DO NOT “COPY TO ALL” WITHIN THIS MENU. DOING SO WILL SET ALL CHANNELS TO RECORD ON CH 1
• Click on DETECT/VIDEO DETECT
• ENABLE motion for each channel
• Click region SETUP (do this for all channels) To select a region – left click and drag across screen to turn blocks red RED = Motion CLEAR = NO motion

•  Right click to exit region settings
• Click APPLY and SAVE
• Click on the STORAGE icon [bottom row]
• Click SCHEDULE
• Click on the COG WHEEL icon  [right side]
• Deselect REGULAR and SELECT MD for Period 1

•  Select ALL for all days, click SAVE
• Click COPY and select ALL for all cameras
• Click APPLY
• Click RECORD [Left column]
• Select ALL button listed under MAIN STREAM  SCHEDULE (or it also may say AUTO)
• Click APPLY/OK
• Right-Click to exit the Menu A green camera / red running men icons appear at the top right corner of each camera if motion is detecting. THERE ARE NO ICONS visible if motion is not being detected.

•  Green camera = Recording to the HDD
• Red running men = Motion is enabled and working