Warning: count(): Parameter must be an array or an object that implements Countable in /home/customer/www/elinetechnology.com/public_html/wp-content/plugins/alaska-core/core/metaboxes/init.php on line 746
How to Archives - eLine Technology
Call our Support line 800.683.6835
31 May 2016
27 May 2016

How to configure Motion Detection and recording for eLine Tribrid Recorders

Technical Support Knowledge Base: How to configure Motion Detection and recording for eLine Tribrid Recorders

Click Here to Download a Printable PDF

From Live screen:

  • Right click and choose Main Menu
  • Login
  • Click on the CAMERA icon [bottom row]
  • Click on ENCODE [Left column]
  • Select the recording resolution and frame rates desired for each camera
  • Click APPLY and SAVE when all cameras have been adjusted
  • Click on EVENT icon [bottom row] **IMPORTANT** DO NOT “COPY TO ALL” WITHIN THIS MENU. DOING SO WILL SET ALL CHANNELS TO RECORD ON CH 1
  • Click on DETECT/VIDEO DETECT
  • ENABLE motion for each channel
  • Click region SETUP (do this for all channels) To select a region – left click and drag across screen to turn blocks red RED = Motion CLEAR = NO motion

figure-2-motion

  •  Right click to exit region settings
  • Click APPLY and SAVE
  • Click on the STORAGE icon [bottom row]
  • Click SCHEDULE
  • Click on the COG WHEEL icon  [right side]
  • Deselect REGULAR and SELECT MD for Period 1

figure-3-motion

  •  Select ALL for all days, click SAVE
  • Click COPY and select ALL for all cameras
  • Click APPLY
  • Click RECORD [Left column]
  • Select ALL button listed under MAIN STREAM  SCHEDULE (or it also may say AUTO)
  • Click APPLY/OK
  • Right-Click to exit the Menu A green camera / red running men icons appear at the top right corner of each camera if motion is detecting. THERE ARE NO ICONS visible if motion is not being detected.

 

  •  Green camera = Recording to the HDD
  • Red running men = Motion is enabled and working
Share this
27 May 2016

eLine Tribrid DVR How to guide Startup Wizard and Configure Motion Detection

eLine Tribrid DVR How to guide Startup Wizard and Configure Motion Detection

Click Here for a Printable PDF version

  • When the system has started, and the wizard is still enabled:Deselect ‘startup’ Click NEXT STEP  [FIG. 1]

Figure 1: Startup Wizard Screen
Figure 1: Startup Wizard Screen

  • Verify HDD is set to overwrite
  • Click DATE&TIME  Tab
  • Configure your system date and time settings *Suggestion* Do not enable NTP unless required
  • Click NEXT STEP
  • Plug in a network cable, and select DHCP (to obtain an IP and verify the connection)  [FIG. 2]
Figure 2: Select the circle dot to high-lite yellow next to DHCP

Figure 2: Select the circle dot to high-lite yellow next to DHCP

  • Click NEXT STEP
  • Click on the ‘cog wheel’ button on the right side of the screen [FIG.3]

Figure 3: On this screen click the "cog-wheel or gear" button
Figure 3: On this screen click the “cog-wheel or gear” button

  • Deselect REGULAR and SELECT MD for Period 1 [FIG.4]

Figure 4: make sure MD is highlighted and check yellow and Regular is not
Figure 4: make sure MD is highlighted and check yellow and Regular is not

  •  Select ALL for all days, click SAVE
  • Click COPY and apply to all channels
  • Click FINISH
  • Right-Click main screen choose MAIN MENU
  • Login
  • Click STORAGE icon > SETTINGS row
  • Click RECORD in the left column [FIG.5]

Figure 5: On this screen click record highlighted in black

Figure 5: On this screen click record highlighted in black

  • Select ALL button listed under MAIN STREAM – SCHEDULE (or may say AUTO)

  • SAVE
  • Right-Click to exit the Menu System is now configured for motion recording

Share this

© 2019 eLine Technology | Toll Free: 800.683.6835 | 303.938.1133 | Website by Tonya Haley

Click Me